您的位置: 标准下载 » 国内标准 » GB 国标 »

GB 6730.17-1986 铁矿石化学分析方法 燃烧碘量法测定硫量

时间:2024-05-19 09:17:23 来源: 标准资料网 作者:标准资料网 阅读:8920
下载地址: 点击此处下载
基本信息
标准名称:铁矿石化学分析方法 燃烧碘量法测定硫量
英文名称:Methods for chemical analysis of iron ores; The combustion iodometric method for the determination of sulfur content
中标分类: 矿业 >> 黑色金属矿 >> 铁矿
ICS分类: 采矿和矿产品 >> 金属矿
替代情况:GB 1368-1978
发布部门:国家标准局
发布日期:1986-08-19
实施日期:1987-08-01
首发日期:1986-08-19
作废日期:1900-01-01
主管部门:中国钢铁工业协会
提出单位:中华人民共和国治金工业部
归口单位:全国钢标准化技术委员会
起草单位:包头钢铁公司、上海钢铁研究所
起草人:洪志湧、任庆中、潘伯春
出版社:中国标准出版社
出版日期:1900-01-01
页数:5页
适用范围

本标准适用于铁矿石、铁精矿、烧结矿和球团矿中硫量的测定。测定范围:0.002-0.50%。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 矿业 黑色金属矿 铁矿 采矿和矿产品 金属矿
【英文标准名称】:Weldingconsumables-Tubularcoredelectrodesforgasshieldedmetalarcweldingofhighstrengthsteels-Classification
【原文标准名称】:焊接用料.高强度钢的气体保护金属电弧焊接用管状芯电极.分类
【标准号】:BSEN12535-2000
【标准状态】:作废
【国别】:英国
【发布日期】:2000-06-15
【实施或试行日期】:2000-06-15
【发布单位】:英国标准学会(BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:混合气体;焊丝电极;保护气体;钢;规范(验收);焊接填充金属;气体保护焊;电焊条;特性;分类系统;化学性质;分类;气体保护金属极电弧焊;高强度钢;电极;气体;钢件焊接;标记;名称与符号;焊接;芯焊丝电极
【英文主题词】:
【摘要】:Thisstandardspecifiesrequirementsforclassificationoftubularcoredelectrodesintheas-weldedorstressrelievedconditionforgasshieldedmetalarcweldingofhighstrengthsteelswithaminimumspecifiedyieldstrengthhigherthan500N/mm.Onetubularcoredelectrodemaybetestedandclassifiedwithdifferentgases.Itisrecognizedthattheoperatingcharacteristicsoftubularcoredelectrodescanbemodifiedbytheuseofpulsedcurrent,butforthepurposesofthisstandard,pulsedcurrentisnotusedfordeterminingtheelectrodeclassification.
【中国标准分类号】:J33
【国际标准分类号】:25_160_20
【页数】:16P;A4
【正文语种】:英语


Product Code:SAE AMS4117
Title:Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire and Flash Welded Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr, (6061; -T6, -T651), Solution and Precipitation Heat Treated
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope:This specification covers an aluminum alloy in the form of rolled or cold-finished bars, rods, and wire and of flash welded rings and stock for flash welded rings.These products have been used typically for parts requiring moderate strength where limited formability is acceptable, but usage is not limited to such applications.